- Server
Cisco, Intel, Qct ..
- Deep Learning, AI
- Workstation
- Hệ thống lưu trữ
- Thiết bị mạng
- Linh kiện server
Ram Server
SSD Server
HDD Server
Fan - Heatsink
Psu Server
Chasiss
- IPC Industrial
- Khuyến mại
- Liên hệ
Máy chủ Supermicro 6026TT-BTF 4 Node Barebone LFF
Four systems (nodes) in a 2U form factor. Each node supports :
Dual 1366-pin LGA Sockets Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM
1 (x16) PCI-E ( Low Profile)
Integrated IPMI 2.0 with KVM and Dedicated LAN
Intel® 82576 Dual-Port Gigabit Ethernet Controller
3x Hot-swap SATA Drive Bays
1400W Gold-level High-efficiency Power Supply
Máy chủ Supermicro 6026TT-BTF 4 Node Barebone LFF
Four systems (nodes) in a 2U form factor. Each node supports :
Dual 1366-pin LGA Sockets Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM
1 (x16) PCI-E ( Low Profile)
Integrated IPMI 2.0 with KVM and Dedicated LAN
Intel® 82576 Dual-Port Gigabit Ethernet Controller
3x Hot-swap SATA Drive Bays
1400W Gold-level High-efficiency Power Supply
Product SKUs | |
SYS-6026TT-BTF | SuperServer 6026TT-BTF (Black) |
Motherboard | |
4x Super X8DTT-F | |
Processor/Cache | |
CPU | Dual 1366-pin LGA Sockets |
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: | |
Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W | |
Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W | |
QPI | up to 6.4 GT/s |
System Memory (per Node) | |
Memory Capacity | Twelve 240-pin DIMM sockets |
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory | |
Memory Mirroring supported | |
Memory Type | 1333 / 1066 / 800MHz Registered ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB |
Memory Voltage | 1.5 V |
Error Detection | Corrects single-bit errors |
Detects double-bit errors (using ECC memory) | |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | |
On-Board Devices (per Node) | |
Chipset | Intel® 5520 (Tylersburg) chipset |
ICH10R + IOH-36D | |
SATA | Intel ICH10R SATA 3.0Gbps Controller |
RAID 0, 1, 5, 10 support | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
Winbond® WPCM450 BMC | |
Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
Intel® I/OAT 3 support for fast, scaleable, and reliable networking | |
VMDq support for better performance of virtualization | |
1x Realtek RTL8201N PHY (dedicated IPMI) | |
Graphics | Matrox G200eW 8 MB DDR2 |
Super I/O | Winbond W83527HG chip |
Clock Generator | 932S421 chip |
Input / Output (per Node) | |
Serial ATA | Six Serial ATA ports |
3 SATA hard drives supported | |
LAN | 2x RJ45 LAN ports |
1x RJ45 Dedicated IPMI LAN port | |
USB | 2 rear + 1 header (2 Ports) |
4 total USB ports, 2.0 Compliant / 1.1 Compliant | |
VGA | 1x VGA Port |
Serial Port | 1 Fast UART 16550 serial port |
System BIOS (per Node) | |
BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) |
PCI 2.2 | |
ACPI up to 3.0 | |
USB Keyboard support | |
Chassis | |
Form Factor | 2U Rackmount |
Model | SC827B-1200B |
Dimensions | |
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 28.5" (724mm) |
Gross Weight | 85 lbs (38.6kg) |
Available Colors | Black |
Front Panel (per Node) | |
Buttons | Power On/Off button |
UID button | |
LEDs | Power LED (on power button) |
UID LED (on UID button) | |
Network activity LED | |
System Overheat/fan fail/power fail/ LED | |
Expansion Slots (per Node) | |
PCI-Express | 1 (x16) PCI-E ( Low Profile) |
Drive Bays (per Node) | |
Hot-swap | 3x 3.5" SATA Hot-swap drive bays |
Hard drive Backplane | |
2U Hard drive Backplane | |
System Cooling | |
Fans | 4x Cooling Fans |
Power Supply | |
1200W high-efficiency power supply with PMBus | |
AC Input | 100 - 140V, 50 - 60Hz, 7.5 - 11Amp |
180 - 240V, 50 - 60Hz, 5 - 8Amp | |
DC Output | 4 Amp |
+5V standby | |
DC Output | 74 Amp @ 100-140V |
+12V | 100 Amp @ 180-240V |
PC Health Monitoring | |
CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
CPU Core 6-Phase-switching voltage regulator | |
FAN | Total of four 4-pin PWM fans |
4x fans with tachometer monitoring | |
Status monitor for speed control | |
Status monitor for on/off control | |
Low noise fan speed control | |
Temperature | Monitoring for CPU and chassis environment |
CPU thermal trip support | |
Thermal Control for 4x Fan Connectors | |
PSU I2C temperature sensing logic | |
Thermal Monitor 2 (TM2) support | |
PECI | |
LED | Power Fail / Overheat LED |
Suspend-state Indicator LED | |
UID LED | |
Other Features | SDDC Support |
Operating Environment / Compliance | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) |
Non-operating Temperature: -40°to 70°C (-40°to 158°F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | |
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
Tag: Supermicro 6026TT-BTF, 6026TT-BTF, server supermicro 6026, supermicro 4 node