Third-Generation Cached Data Protection for 12 Gbps and 6 Gbps RAID Adapters
Add-on module for Series 8 and Series 7.
Included with Series 8Q and Series 7Q.
Flash backup embedded into 81605ZQ and 81605Z.
Real-Time Health Monitoring
Monitors health of cache protection.
Monitors capacity levels .
Instant RAID Cache Protection
Fully charged within four minutes instead of hours.
RAID performance optimized immediately.
Maintenance-Free Cached Data Protection
Stores protected data for years.
No need to monitor battery charge level.
No shutdown required for battery replacement.
Lower Operating Costs
No monitoring, maintenance, replacement, or disposal costs because of batteries.
No Data Loss from Power Failures
Replaces lithium-ion batteries.
Single-Level Cell (SLC) Flash
Faster writes and better reliability than multi-level cell (MLC) flash.
No toxic battery disposal.
Simplified IATA compliance.
ASR 8885Q (included)
ASR 81605Z (flash backup embedded)
ASR 81605ZQ (flash backup embedded)
ASR 71605Q (included)
ASR 7805Q (included)
0 C to 50 C (with 200 LFM airflow)
In addition to the operating currents for the adapters listed below, the AFM-700 typically draws 500 mA during its initial charge cycle. No further power is required once the super capacitor is fully charged.
ASR-8805/8885/8885Q: 1.0 A at 3.3 V and 1.1 A at 12 V
ASR-81605Z/81605ZQ: 1.5 A at 3.3 V and 1.0 A at 12 V
ASR-7805/7805Q: 0.1 A at 3.3 V and 1.5 A at 12 V
ASR-71605/71605Q: 0.1 A at 3.3 V and 1.6 A at 12 V
ASR-71685/72405: 0.1 A at 3.3 V and 1.8 A at 12 V
ASR-78165: 1.1 A at 3.3 V and 1.3 A at 12 V
Cable connected to the AFM-700: ~7 inches; extension cable: ~18 inches